|
1. Run the
attached file (
3_6_1_5.exe)
which will unpack the BGAN upgrader into the
"c:\BGAN_upgrader_3_6_1_5" folder on your
computer.
2. Connect the
Ethernet port of the BGAN modem to be upgraded
to the LAN port of the PC using a standard
Ethernet cable. Insert a SIM card into the
BGAN modem.
3. Connect
an AC/DC converter (supplied in the BGAN
install kit) to the BGAN modem, If it does not
power on automatically, press the power button
to turn it on.
4. Run
BGANUpgrader.exe file in the above folder.
5. On the
BGAN Upgrader Window, click on "Upgrade"
button.
6. During
the Upgrade process, it is imperative that the
power supply and Ethernet connections to the
BGAN modem are not removed or interrupted.
7. The
status and progress of the Upgrade is shown in
the BGAN Upgrader window.
8. If a SIM
card is not present, an error window will pop
up asking to check that a SIM card is present.
You will then need to go back to Step 2.
9. The
upgrade process will proceed. After ~2
minutes, a window will pop up stating:
"Upgrade Complete. Click OK and wait until we
get software version."
10. Click
OK.
11. After
~30 seconds, the following message will appear
in the window: "Software version was
retrieved!"
12. Terminal
has been successfully upgraded, and the power
and Ethernet connections can be removed.
13. If you
want to upgrade another terminal, there is no
need to close the BGAN Upgrader window. Just
repeat Steps 2 through 12, but omit Step 4.
If an
earlier software upgrade was unsuccessful,
then the modem will power-up in a bootrom
mode, and the LEDs will show a pattern of
flashing and solid red/green colors (refer to
the user guide for more details). You can also
force the modem to power-up in this mode by
pressing the audio button when you power-up
the modem. The upgrader can still be used to
re-upgrade the modem if it is in bootrom mode.
The
following functions are also available from
the pull-down menu items: |
